R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Wierd Occurence with Tannoy-System 215 DMTs  (Read 1827 times)

Y.Landrian

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Wierd Occurence with Tannoy-System 215 DMTs
« on: January 05, 2007, 10:44:12 am »

Hi,

I just started working my first payed studio job and i would like to impress my superiors. We just encountered a problem with the Tannoy System 215dmts. One of the wall mounted speakers displays no highend information. To clarify what i hear, it has no distortion (like when a tweeter or woofer cracks). I used a High Pass filter to verify that it was not working at all.

Can anyone offer me some things to try? or if youve experienced this before please offer some expert advise. Thank you all!

Yasiel
Logged

andsonic

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
Re: Wierd Occurence with Tannoy-System 215 DMTs
« Reply #1 on: January 10, 2007, 05:44:30 pm »

We have a pair also.  They can be biamped.  Check the settings.  The tweeter may just not be hooked up.
Logged
Jason Andrews
Mixing/Mastering Engineer
Studio E - Northern California

Phuckwit

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
Re: Wierd Occurence with Tannoy-System 215 DMTs
« Reply #2 on: March 04, 2007, 09:39:03 pm »

Since its in at 1.5k if it wasn't working you would not need an analizer to notice I hope.
Logged
Regards.?:*??*:?. ??.??¯`?.Mark Fairfax-Harwood, Engineer Springvale Studios
http://www.springvalestudios.com
Pages: [1]   Go Up