R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 3 4 [All]   Go Down

Author Topic: What CD-rs are you using now?  (Read 10506 times)

bblackwood

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
What CD-rs are you using now?
« on: July 19, 2011, 03:05:06 pm »

Anyone found anything better / more consistent than the TY silvers? About half of the TY silvers I burn are failing in Plextools, growing weary of wasting my time with these...
Logged
Brad Blackwood
euphonic masters

SafeandSoundMastering

  • Full Member
  • ***
  • Offline Offline
  • Posts: 222
  • Real Full Name: Barry Gardner
  • My analogue rack
Re: What CD-rs are you using now?
« Reply #1 on: July 19, 2011, 03:09:23 pm »

Burning TY's at 0.2 c1's av per second. White top's.

Are you sure your burner is ok?
Logged
Barry Gardner
SafeandSound Mastering UK based online mastering studio.

bblackwood

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
Re: What CD-rs are you using now?
« Reply #2 on: July 19, 2011, 03:50:37 pm »

Yah, I have several Plextors hanging off the DAW - similar results on all of them.
Logged
Brad Blackwood
euphonic masters

jdg

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
Re: What CD-rs are you using now?
« Reply #3 on: July 19, 2011, 05:31:45 pm »

i had a bad batch that i ordered about 5mo ago (need to re-order, down to my last few)

white topped, 1 outta 5/6 burned with C2s... thought it was burner... switched them.. same results.
Logged
John McCaig
-the caption captain

Oldfart57

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
  • Real Full Name: Denis Paquette
Re: What CD-rs are you using now?
« Reply #4 on: July 19, 2011, 07:21:29 pm »

I'm also using TY white tops.

I've had to experiment with various burning speed before coming up with ( what I taught was) a decent result.

Burning at x20, .6 to .8 average, and 12 to 16 max


Anything above that ends up in the junk pile.


Since using TYs, never had a master rejected by a duplication plant



Logged

Bubba--Kron

  • Newbie
  • *
  • Offline Offline
  • Posts: 47
Re: What CD-rs are you using now?
« Reply #5 on: July 19, 2011, 07:26:43 pm »

What burning software are you guys using??
Logged
Cheers, Bryan Richards

Oldfart57

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
  • Real Full Name: Denis Paquette
Re: What CD-rs are you using now?
« Reply #6 on: July 19, 2011, 07:38:38 pm »

What burning software are you guys using??

I burn in Wavelab, and test with Plextools
Logged

bblackwood

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
Re: What CD-rs are you using now?
« Reply #7 on: July 19, 2011, 08:26:19 pm »

What burning software are you guys using??
Sequoia.
Logged
Brad Blackwood
euphonic masters

ggidluck

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 70
Re: What CD-rs are you using now?
« Reply #8 on: July 19, 2011, 10:08:46 pm »

Brad,
I have had good success with discs from WTSmedia.com in Chattanooga.
http://www.wtsmedia.com/p-178-jvc-taiyo-yuden-52x-shiny-silver-cd-rs.aspx
WTS Warranty: Lifetime, Free Exchange

Free shipping and they offer to replace bad discs. Probably a good bet.

I see they also sell medical grade CDR's. They are supposed to store medical data guaranteed for 100 years. Haven't tried them though.
Logged

John Scrip - MASSIVE Mastering

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
  • Real Full Name: John Scrip
Re: What CD-rs are you using now?
« Reply #9 on: July 20, 2011, 01:59:23 am »

The "regular" TY's (printable, plain 'ol) have been horrible -- Same thing.  Bad, C2's, etc.  Sorry I even ordered some although I only use them for refs. 

The main discs I've been using are the TY Water Shields -- Those have been fine - so far.  Consistently good stuff. 
Logged
John Scrip - MASSIVE Mastering

lowland

  • Full Member
  • ***
  • Offline Offline
  • Posts: 110
Re: What CD-rs are you using now?
« Reply #10 on: July 20, 2011, 03:33:30 am »

FWIW TY white tops here burnt with SADiE/Plextor Premium II.

Never had significant problems with the media save for the occasional (perhaps once a year) 'solid C2' disc which I've assumed to be the start or end of a batch run.
Logged
Nigel Palmer
Lowland Masters
www.lowlandmasters.com

Thomas W. Bethel

  • Sr. Member
  • ****
  • Online Online
  • Posts: 318
  • Real Full Name: Thomas W. Bethel
  • When only the best will do.
Re: What CD-rs are you using now?
« Reply #11 on: July 20, 2011, 06:33:18 am »

TY Silver discs burned at 8X on a Plextor with Wavelab 6. No problems so far (knock on wood).

We have a GREAT distributor who we buy from http://www.thelittlewarehouse.com/.There are still a lot of reject TYs floating around that some places are selling as the "good stuff" when in point of fact they are rejects from Plextor. I guess it is good for their bottom line but I don't want to use something that I cannot trust.

We use a lot of Sony CDs for listening copies and they were always reliable but recently we have been getting a lot of errors. Maybe they switched manufacturers???
Logged
Thomas W. Bethel
Managing Director
Acoustik Musik, Ltd.
http://www.acoustikmusik.com/

Doing what you love is freedom.
Loving what you do is happiness.

Celebrating 23 years in business in 2018

Jerry Tubb

  • Full Member
  • ***
  • Offline Offline
  • Posts: 172
  • Real Full Name: Jerry Tubb
Re: What CD-rs are you using now?
« Reply #12 on: July 20, 2011, 06:46:11 am »

Anyone found anything better / more consistent than the TY silvers? About half of the TY silvers I burn are failing in Plextools, growing weary of wasting my time with these...

Yep we've had dicey results with Taiyo Yuden for the last coupla years, with both silvers & whites.

Didn't someone predict this when JVC came on board?

Sometimes a batch is good, below 1.0 C1 errors, more often from 1.0 to 2.0, but within spec.

Then a rare bad batch rears it's ugly head, even a random few bad discs within a good batch, it's a little puzzling.

Can be a real time waster when on a deadline crunch, especially with longer projects that require a wall-to-wall burn on the disc surface.

A real shame that quality control seems to be slipping with TY.

A far cry from the halcyon days of yore!

(I just love saying that)

So is it inconsistent dye coating that causes the problem?

Or a rotational balance thing?

I even had a batch where I had to manually smooth out the plastic in the center hole to allow the burner to grab it properly.

I'm tempted to try those pricey Green Tune CD-R's strictly for masters to see if they yield any better results.

Or probably the Water Shield TYs...
JT
Logged
Terra Nova Mastering
Celebrating 25 years of Mastering!

SafeandSoundMastering

  • Full Member
  • ***
  • Offline Offline
  • Posts: 222
  • Real Full Name: Barry Gardner
  • My analogue rack
Re: What CD-rs are you using now?
« Reply #13 on: July 20, 2011, 07:36:47 am »

Yes I recall a set giving C1's of 1.5 / 2.0 or so, but that is still very good compared with some of the trash there is.
Logged
Barry Gardner
SafeandSound Mastering UK based online mastering studio.

bblackwood

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
Re: What CD-rs are you using now?
« Reply #14 on: July 20, 2011, 07:55:05 am »

This recent batch fails in-house QC roughly half the time, no plant rejections.

The worst part is most of the discs have physical issues - when you visually inspect the disc you can see scuffs, discolorations, etc...

I'd happily pay a premium for discs that someone actually cares about manufacturing properly.
Logged
Brad Blackwood
euphonic masters

djwaudio

  • Moderator
  • Full Member
  • *****
  • Offline Offline
  • Posts: 224
  • Real Full Name: Dana J White
Re: What CD-rs are you using now?
« Reply #15 on: July 20, 2011, 09:52:14 am »


I'd happily pay a premium for discs that someone actually cares about manufacturing properly.

 Green Tune discs have been flawless for me lately. My only issue is, they can't be sold in bulk because of the coated surface.
Logged
Respectfully submitted,

Dana J White
Specialized Mastering
www.specializedmastering.com

bblackwood

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
Re: What CD-rs are you using now?
« Reply #16 on: July 20, 2011, 10:50:38 am »

Green Tune discs have been flawless for me lately. My only issue is, they can't be sold in bulk because of the coated surface.
Yah, I might have to try those out. Time wasted cutting coasters more than offsets the premium price.
Logged
Brad Blackwood
euphonic masters

jdg

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
Re: What CD-rs are you using now?
« Reply #17 on: July 20, 2011, 12:37:57 pm »

Yah, I might have to try those out. Time wasted cutting coasters more than offsets the premium price.

thats a good point....

im gonna grab a batch
Logged
John McCaig
-the caption captain

Jerry Tubb

  • Full Member
  • ***
  • Offline Offline
  • Posts: 172
  • Real Full Name: Jerry Tubb
Re: What CD-rs are you using now?
« Reply #18 on: July 20, 2011, 01:15:43 pm »

Green Tune discs have been flawless for me lately. My only issue is, they can't be sold in bulk because of the coated surface.

Hi Dana, who's your supplier for those?

Seems like they go for $5-7 each correct?

If a client is spending say 1500 on mastering, what's a fiver on a good disc!

I know a few years ago, we kinda made fun of the pricey Green Tune, now we're taking a second look. ~<(:-])~

Best, JT
Logged
Terra Nova Mastering
Celebrating 25 years of Mastering!

David Glasser

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: What CD-rs are you using now?
« Reply #19 on: July 20, 2011, 04:35:34 pm »

Green Tune discs have been flawless for me lately. My only issue is, they can't be sold in bulk because of the coated surface.

More likely, they aren't sold in bulk, because they can charge more for singles. TYs have been fine. For the past 20 years.
Logged

adamgonsa

  • Newbie
  • *
  • Offline Offline
  • Posts: 36
Re: What CD-rs are you using now?
« Reply #20 on: July 20, 2011, 10:22:46 pm »

I've had great luck with the JVC re-branded TY from Meritline.  They are the "premium" silver tops.  I'm about halfway through a spindle and have only had to throw out 2, the rest have given excellent results.  I use a Pioneer for burning and a PX-716SA with Plextools.
Logged
Adam Gonsalves
Telegraph Mastering

Andy Krehm

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
  • Real Full Name: Andy Krehm
Re: What CD-rs are you using now?
« Reply #21 on: July 20, 2011, 10:45:23 pm »


......I'm tempted to try those pricey Green Tune CD-R's strictly for masters to see if they yield any better results.

Or probably the Water Shield TYs...
JT
Hey JT:

I've used Water Shield TYs for a couple of years and are very reliable. Once in a while a C2 but not very often. They also look really nice when you print on them!
Logged
Andy Krehm
Silverbirch Productions
www.silverbirchmastering.com

Jerry Tubb

  • Full Member
  • ***
  • Offline Offline
  • Posts: 172
  • Real Full Name: Jerry Tubb
Re: What CD-rs are you using now?
« Reply #22 on: July 21, 2011, 01:14:52 am »

Hey JT:

I've used Water Shield TYs for a couple of years and are very reliable. Once in a while a C2 but not very often. They also look really nice when you print on them!

Thanks Andy, I've got a batch of water shields arriving tomorrow, will give it a go!

Still curious about the Green Tunes though.
JT
Logged
Terra Nova Mastering
Celebrating 25 years of Mastering!

Jerry Tubb

  • Full Member
  • ***
  • Offline Offline
  • Posts: 172
  • Real Full Name: Jerry Tubb
Re: What CD-rs are you using now?
« Reply #23 on: July 22, 2011, 08:07:59 pm »

Just a quick update.

I burned a couple of (recently acquired) TY Water Shield masters today.

One tested C1's at 0.5 and the other at 0.6 in PlexTools.

Much improved over the previous batch of regular TYs.

I assume that since the Water Shields are more expensive, perhaps they are an older run of discs, before the JVC arrangement.

And the DiscPainter label looks really nice.

So Muchas Gracias Mi Amigos for the good advice!

JT
Logged
Terra Nova Mastering
Celebrating 25 years of Mastering!

Thomas W. Bethel

  • Sr. Member
  • ****
  • Online Online
  • Posts: 318
  • Real Full Name: Thomas W. Bethel
  • When only the best will do.
Re: What CD-rs are you using now?
« Reply #24 on: July 23, 2011, 07:39:48 am »

Anyone tried this application http://www.cdspeed2000.com/download.html

To repeat myself from an earlier post there are a lot of TYs that are NOT first line TYs floating about. They are being sold to distributors as seconds at a reduced rate.  Unfortunately a lot of unscrupulous dealers are selling them to an unsuspecting public as the real deal with first line prices. These are the ones with the cosmetic defects and the high error rates. TY never wanted these to be out in the market place as first line goods. They were the rejects that TYs quality control had rejected. I don't think this was a good plan for TY to undertake and they should never have been branded as TYs but the genie is out of the bottle and we all have to be more vigilante in who we buy from. FWIW and YMMV
Logged
Thomas W. Bethel
Managing Director
Acoustik Musik, Ltd.
http://www.acoustikmusik.com/

Doing what you love is freedom.
Loving what you do is happiness.

Celebrating 23 years in business in 2018

Bob Olhsson

  • Newbie
  • *
  • Offline Offline
  • Posts: 25
Re: What CD-rs are you using now?
« Reply #25 on: July 24, 2011, 05:57:36 pm »


The main discs I've been using are the TY Water Shields -- Those have been fine - so far.  Consistently good stuff.
Same experience here. I just got some JVC labeled ones.

Incidentally, TY bought JVC's blank media division and not the other way around.

Rick Sutton

  • Newbie
  • *
  • Offline Offline
  • Posts: 35
Re: What CD-rs are you using now?
« Reply #26 on: July 25, 2011, 08:53:35 pm »

Thanks for the tip on the watershields. First test was .6/18 which is a big improvement over the last few cases I've bought.
 One question, do the silver watershields actually look milky white on the top surface? They are not at all silver like the thermal TY's I am used to and was just wondering if the ones I got were mis-labeled or that's the way they come. They printed beautifully on the Rimage thermal printer.
Logged

djwaudio

  • Moderator
  • Full Member
  • *****
  • Offline Offline
  • Posts: 224
  • Real Full Name: Dana J White
Re: What CD-rs are you using now?
« Reply #27 on: July 25, 2011, 09:21:16 pm »

I've been getting the Green Tune CDRs from VA Media.  They are the main US supplier, from what I understand.  The price has come down to the three to four dollar range. 

The reason they don't come in bulk is because of the delicate/abrasive coating.

When you talk to Ross, tell him I sent ya!

VA Media
Mr Ross Allen - Owner
6029 Deacon Rd
Sarasota FL 34238
USA
+1 941-924-3734
www.vaformedia.com
Logged
Respectfully submitted,

Dana J White
Specialized Mastering
www.specializedmastering.com

John Scrip - MASSIVE Mastering

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
  • Real Full Name: John Scrip
Re: What CD-rs are you using now?
« Reply #28 on: July 26, 2011, 12:44:59 am »

Thanks for the tip on the watershields. First test was .6/18 which is a big improvement over the last few cases I've bought.
 One question, do the silver watershields actually look milky white on the top surface? They are not at all silver like the thermal TY's I am used to and was just wondering if the ones I got were mis-labeled or that's the way they come. They printed beautifully on the Rimage thermal printer.
Yep, the "silver" ones are more like a "transparent white" -- They look absolutely fantastic with heavy ink coverage, but the plain glossy-white ones look better with simple text & line art (IMO/E). 
Logged
John Scrip - MASSIVE Mastering

TotalSonic

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
Re: What CD-rs are you using now?
« Reply #29 on: July 26, 2011, 12:12:23 pm »

fwiw - I got a couple bulk spindles of 100 each of unbranded JVC/TY silver ink-jet printables from http://www.meritline.com a few months ago that have been performing as expected (BLER averaging under 0.8/second - no C2's, no CU's) with no problems of coasters at all beyond maybe one or two at the top and bottom of the spindle.

Digital file only orders (usually sent as cue+wav along with a link to my Sonoris DDP Player OEM) and/or DDP master being sent to the plant have been steadily increasing for a while so I haven't been going through discs as fast as I used to.

Best regards,
Steve Berson

bblackwood

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
Re: What CD-rs are you using now?
« Reply #30 on: July 27, 2011, 08:43:50 am »

Think I'll try the TY water shields - looks like a simple solution as long as I get acceptable masters.

Digital file only orders (usually sent as cue+wav along with a link to my Sonoris DDP Player OEM) and/or DDP master being sent to the plant have been steadily increasing for a while so I haven't been going through discs as fast as I used to.
Yah, I probably only cut physical parts on about 30% of projects now - virtually no reference discs any more. I like the trend, it makes sense, but I still need something where I don't get C2's on every other burn. What a colossal waste of time!
Logged
Brad Blackwood
euphonic masters

Mastertone

  • Newbie
  • *
  • Offline Offline
  • Posts: 38
Re: What CD-rs are you using now?
« Reply #31 on: July 27, 2011, 04:55:39 pm »

What burning software are you guys using??


Samplitude and JVC (ty) discs. Just as good as my previous TY silver tops.
Logged
Jonas Ekstrom
Mastertone Mastering
www.mastertone.se

Rick Sutton

  • Newbie
  • *
  • Offline Offline
  • Posts: 35
Re: What CD-rs are you using now?
« Reply #32 on: July 28, 2011, 03:41:05 pm »

 Well, the water-shields aren't perfect. Hit a bad one with a pile of C2's.
Logged

Jerry Tubb

  • Full Member
  • ***
  • Offline Offline
  • Posts: 172
  • Real Full Name: Jerry Tubb
Re: What CD-rs are you using now?
« Reply #33 on: July 29, 2011, 01:22:43 am »

Well, the water-shields aren't perfect. Hit a bad one with a pile of C2's.

I must've gotten a good batch, 0.3 C1 test today.

JT
Logged
Terra Nova Mastering
Celebrating 25 years of Mastering!

John Scrip - MASSIVE Mastering

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
  • Real Full Name: John Scrip
Re: What CD-rs are you using now?
« Reply #34 on: July 29, 2011, 11:46:57 am »

Everybody's going to hit a bad one here and there... 
Logged
John Scrip - MASSIVE Mastering

jamesp

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
Re: What CD-rs are you using now?
« Reply #35 on: August 03, 2011, 08:50:19 am »

Anyone tried this application http://www.cdspeed2000.com/download.html


I haven't tried it personally as Plextools still does what I want, but Erik has a good track record with this sort of software so it would be worth trying if you need error checking with a newer drive.

James.
Logged
James Perrett - JRP Music
http://www.jrpmusic.net

Gold

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 85
Re: What CD-rs are you using now?
« Reply #36 on: August 03, 2011, 10:01:42 am »

Anyone tried this application http://www.cdspeed2000.com/download.html

This came up on GS a while ago. I asked if it was less wonky than Plextools. The only responder said it was more wonky than Plextools FWIW. For $25 I might give it a shot. I have a new Windows 7 computer I'm getting the puzzle pieces together for. I'd like to have that capability on that machine.
Logged
Paul Gold
Salt Mastering

jamesp

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
Re: What CD-rs are you using now?
« Reply #37 on: August 04, 2011, 08:33:33 am »

Paul - are you sure you're not confusing this with Plex Utilities? Erik wrote CDSpeed which was absorbed into Nero's burning suite and renamed Drivespeed. For political reasons Drivespeed's error checking tools didn't work with Plextor drives but did work with a wide range of other drives. Any wonkiness would probably have been down to the drive's hardware rather than Erik's software. Erik also coded the earlier versions of Plextools but left Plextor to join Ahead Software before the versions with error checking came out.

You will probably still need a drive based on the Sanyo chipset to take full advantage of the error checking which means an older Plextor or BenQ drive. I get the impression that the newer Mediatek based drives (like the Liteons and new Plextors) aren't as reliable for error checking.

James.
Logged
James Perrett - JRP Music
http://www.jrpmusic.net

Gold

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 85
Re: What CD-rs are you using now?
« Reply #38 on: August 04, 2011, 08:55:10 am »

James,
Optidrive was the software I was asking about. Plextools works fine most of the time but I have both LE and the other one installed because sometimes one works and sometimes the other one works. It stays in a state that lets me "Restore" it to start it. If I "Restore" and try to run it I have to restart the computer and it's a crap shoot on whether it will work at all. I have to close it and "Start Plextools" to have it work. Not terrible but it required an ahem learning curve.That's what I meant by wonky.

I have a few old Plextors on a shelf.
Logged
Paul Gold
Salt Mastering

bblackwood

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
Re: What CD-rs are you using now?
« Reply #39 on: August 09, 2011, 01:09:15 pm »

Just cut my first production master on a TY Water Shield and it's amazing - the numbers look like the TY's of old. If they're all this good, i'm gonna order 1k of 'em and forget about it...
Logged
Brad Blackwood
euphonic masters

John Scrip - MASSIVE Mastering

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
  • Real Full Name: John Scrip
Re: What CD-rs are you using now?
« Reply #40 on: August 10, 2011, 01:58:24 am »

And they sure are pretty...  And you can run 'em under water without all the ink spilling off.  Bonus.
Logged
John Scrip - MASSIVE Mastering

Viitalahde

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 99
  • Real Full Name: Jaakko Viitalähde
Re: What CD-rs are you using now?
« Reply #41 on: August 10, 2011, 03:48:41 am »

I think I still have about 250 of my TY's of choice. I think I should order more soon.

In reality, I'm just waiting for DDP's to be accepted everywhere. i think I deliver most of my masters as DDP's now, which is great.
Logged
Jaakko Viitalähde
Virtalähde Mastering, Kuhmoinen/Finland
http://www.virtalahde.com
http://www.facebook.com/VirtalahdeMastering

Technologyworks

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • Technologyworks Mastering
Re: What CD-rs are you using now?
« Reply #42 on: August 10, 2011, 08:19:01 am »

Just cut my first production master on a TY Water Shield and it's amazing - the numbers look like the TY's of old. If they're all this good, i'm gonna order 1k of 'em and forget about it...

I've been using the watershields a few years. They have dropped slightly in quality, not in the general numbers, but in that in each pack I get a few that give me C2s which is very tedious.
When I first started using them I never saw a C2

Peter

Logged
Peter Beckmann
Technologyworks Mastering
http://www.technologyworks.co.uk

Dave-G

  • Newbie
  • *
  • Offline Offline
  • Posts: 24
Re: What CD-rs are you using now?
« Reply #43 on: August 10, 2011, 03:43:48 pm »

I think I've gone through at least two spindles of WaterShields without a single C2, and C1s running very low.  IME it's much more possible to make coasters of them by some screwup with the inkjet printer than anything in the discs themselves. 

And the WaterShields do look great when printed on.

-Dave
Logged
Dave Greenberg
Sonopod Mastering

Dave-G

  • Newbie
  • *
  • Offline Offline
  • Posts: 24
Re: What CD-rs are you using now?
« Reply #44 on: August 10, 2011, 03:50:29 pm »

In reality, I'm just waiting for DDP's to be accepted everywhere.

Amen.
Logged
Dave Greenberg
Sonopod Mastering

jdg

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
Re: What CD-rs are you using now?
« Reply #45 on: August 10, 2011, 10:21:00 pm »

just ordered a buncha watershields...
fingers x'd
Logged
John McCaig
-the caption captain

bradsarno

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 50
  • Real Full Name: Brad Sarno
Re: What CD-rs are you using now?
« Reply #46 on: August 18, 2011, 11:12:02 am »

Last November, 2010, I stocked up on a few 100-spindles of non-descript silver Taiyo Yudens from U-Line. These are consistently giving me C1's in the .4/sec to .6/sec and no CU or C2 that I've seen, yet.

Burner is a Plexwriter Premium-U. Discs burned from Soundblade, Sonoris DDP Player, or Waveburner.



Brad Sarno
www.bluejadeaudio.com
www.sarnomusicsolutions.com

aleatoric

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 91
  • Real Full Name: Mark Trewella
Re: What CD-rs are you using now?
« Reply #47 on: August 18, 2011, 05:27:20 pm »

Taiyo Yuden/JVC 80m.  No issues thus far. 
Logged
Pages: 1 2 3 4 [All]   Go Up