R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Dan speaks out!  (Read 5267 times)

-fum-

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
Dan speaks out!
« on: October 01, 2006, 12:37:21 pm »

Hey Dan,

Jon Ulrigg from ShinyBox audio here.  Just wanted to say thanks for coming out and talking to the local AES chapter here in the PNW on Friday.

I enjoyed your presentation.  It can certainly be a tough balancing act when presenting technical information to keep everybody on the same page (when you have some people who are in the weeds as far as DSP goes,  and some who don't know what DSP is).

Regards

ju ( the guy toward the back with the cowboy hat.  giddyup!  Smile )

danlavry

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 997
Re: Dan speaks out!
« Reply #1 on: October 03, 2006, 02:46:16 pm »

-fum- wrote on Sun, 01 October 2006 17:37

Hey Dan,

Jon Ulrigg from ShinyBox audio here.  Just wanted to say thanks for coming out and talking to the local AES chapter here in the PNW on Friday.

I enjoyed your presentation.  It can certainly be a tough balancing act when presenting technical information to keep everybody on the same page (when you have some people who are in the weeds as far as DSP goes,  and some who don't know what DSP is).

Regards

ju ( the guy toward the back with the cowboy hat.  giddyup!  Smile )


Thank you for your nice comment. It was good to see that the northwest (Seattle area) has such a lively and active AES Chapter.

Regards
Dan Lavry
http://www.lavryengineering.com
Logged
Pages: [1]   Go Up