R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Green Glue  (Read 2818 times)

ajcamlet

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Green Glue
« on: September 19, 2006, 12:14:18 PM »

Anyone have any experience with this stuff?

http://www.greengluecompany.com/

Ethan Winer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 571
Re: Green Glue
« Reply #1 on: September 19, 2006, 02:56:42 PM »

> Anyone have any experience with this stuff? <

No direct experience, but I've heard nothing but lavish praise from many people I trust.

--Ethan

Tom C

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 377
Re: Green Glue
« Reply #2 on: September 19, 2006, 03:04:42 PM »

From the the specifications (Working Time, Cure Time, Viscosity,...)
it looks like they have invented bath/kitchen silicone (which is
in fact a nice glue but probably less expensive).
Logged
Tom

.signature failure

crna59

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 277
Re: Green Glue
« Reply #3 on: September 20, 2006, 06:04:59 PM »

I am building a Mastering room and Post room with the stuff. I had to order 15 cases!!
This stuff is nasty if it gets on anything. One thing that I was surprised about is that it's almost a liquid coming out of the tube. I had nightmares of trying to squeeze a high viscosity glue from 200 tubes!
I'm using 2 tubes per 4 x 8 drywall panel. When you use this, you don't need many screws on the second layer. If you mis-place the panel, don't even think about trying to move it.
Good Stuff!!

Regards,
Bruce
Logged
Puget Sound Studios
Bruce A. Brown
Mastering & Post Production
Seattle, WA

It is easier to ask for forgiveness than to ask for permission! Buy! Buy buy....  

ajcamlet

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Re: Green Glue
« Reply #4 on: October 12, 2006, 01:35:12 PM »

Well i tried this stuff on a problem wall in my control room. I added another two layers of 5/8ths sheetrock to an existing single layer.  the glue went between the 2nd and 3rd layer.

So for a week later i can say that this stuff does seem to do what it claims-- and it seems to be increasing as time goes on.  Manufacturer says full attenuation in 30 days.

However- it *is* very messy, kinda pricey,  and in hindsight is probably better applied thru some other method that Caulk tubes since its closer to a liquid that to caulk.

i'll report back after 30 days to see if, indeed, the cure time is as they say.

alan
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.047 seconds with 19 queries.