bblackwood wrote on Fri, 23 June 2006 04:37 |
So, what's your typical chain? Is it too much? Not enough? How often do you change it up? Are you looking to change any part of it?
Discuss.
|
Sequoia loaded source ->Optional eq plug->d/a DAC1->Manley Massive ->Millenia Twincom ->Mytek 24/96 ->Sequoia.
All powered by Equitech balanced power (Oregon product!)
As I'm working, I will sometimes have the Sequoia in software fx mode so I can listen to the results of any post recapture plugs that might be of use later.
What I do works for my market. I currently only have one primary outboard comp and eq, so of course I hope to eventually "diversify". There are a couple pieces I'd like to add just for the alternatives available. Advertising "panel with Weiss Logo" just doesn't cut it....
My last job I had lots of great gear (Z-sys, Sontec, etc) , but still kept the chain in use fairly simple. I find that the more I put in the chain, the harder it is to keep perspective regarding what it was I set out to do. I'd say that my present setup has been good for me in general.
Adding a picture of my lab here:
http://rusbymastering.com/Lab.aspx