R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Sony MXP-700 4-Channel Compressor/Gate Module Schematics  (Read 6472 times)

claatsch

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
Sony MXP-700 4-Channel Compressor/Gate Module Schematics
« on: March 21, 2006, 10:50:37 AM »

Hi,

Perhaps someone could help me out on this one?

I aquired a Sony 4-Channel Compressor/Gate Card that was pulled from a Sony MXP-700 or like console. I don't have any documentation on it but there are a few Sony p/n listed below that might help in identification.

GCN-4
1-658-016-11 (on the main circuit card)

This board is popped full of AD 609(OP275G) op amps (which are SMT) and has two large 96-pin ribbon style connectors soldered to the rear of the board. I was hoping someone could help me out with this one. I don't have pics of the module but may be able to aquire some if necessary.

Thanks in advance,

Chris
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.193 seconds with 19 queries.