R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2 3  All   Go Down

Author Topic: What interface are you using to get in/out of your DAW?  (Read 11146 times)

bblackwood

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
What interface are you using to get in/out of your DAW?
« on: April 04, 2011, 04:45:06 pm »
Originally Posted by: dietrich on Tue, 09 March 2010

Not talking the end convertors, just which pci, firewire etc box you are using to connect to your DAW.
 
My BLA modified MOTU is having issue and time for replacement.
 
D

--------------------------------------------------------------------------------
www.completemastering.com
Logged
Brad Blackwood
euphonic masters

broyhillio

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
  • Real Full Name: Eric Broyhill
Re: What interface are you using to get in/out of your DAW?
« Reply #1 on: April 04, 2011, 05:03:51 pm »
the weiss afi-1, no complaints.
Logged

pmx

  • Newbie
  • *
  • Offline Offline
  • Posts: 25
  • Real Full Name: Paul Matthijs Lombert
Re: What interface are you using to get in/out of your DAW?
« Reply #2 on: April 04, 2011, 09:03:06 pm »
weiss +1, and an 003 for extras
Logged
Paul Matthijs Lombert | The Mastering Factory

Allen Corneau

  • Full Member
  • ***
  • Offline Offline
  • Posts: 125
  • Real Full Name: Allen Corneau
Re: What interface are you using to get in/out of your DAW?
« Reply #3 on: April 04, 2011, 09:16:12 pm »
Sadie PCM-8 BOB for main I/O, and an RME Digi96 PAD for multiple sample rate sessions and the excellent DigiCheck metering software.
Logged
Allen
=====
Allen Corneau Mastering
http://allencorneau.com/

John Scrip - MASSIVE Mastering

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
  • Real Full Name: John Scrip
Re: What interface are you using to get in/out of your DAW?
« Reply #4 on: April 04, 2011, 10:27:36 pm »
Lynx AES16.  No complaints for years.  Geez, I've had it for what seems like forever...
Logged
John Scrip - MASSIVE Mastering

jdg

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
Re: What interface are you using to get in/out of your DAW?
« Reply #5 on: April 04, 2011, 10:39:48 pm »
RME HDSPe
Logged
John McCaig
-the caption captain

Jerry Tubb

  • Full Member
  • ***
  • Offline Offline
  • Posts: 172
  • Real Full Name: Jerry Tubb
Re: What interface are you using to get in/out of your DAW?
« Reply #6 on: April 05, 2011, 01:00:23 am »
The Lynx AES16e PCIe card has been solid as a rock for me.

Especially when paired with the appropriate driver and firmware.

JT
Logged
Terra Nova Mastering
Celebrating 25 years of Mastering!

Dominick Costanzo

  • Newbie
  • *
  • Offline Offline
  • Posts: 48
Re: What interface are you using to get in/out of your DAW?
« Reply #7 on: April 05, 2011, 07:28:38 am »
Lynx AES16
Logged
Dominick Costanzo

Hermetech Mastering

  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Real Full Name: Gregg Janman
  • Manual Gain Rider
Re: What interface are you using to get in/out of your DAW?
« Reply #8 on: April 05, 2011, 07:49:38 am »
This is a great resource topic for me, as if I end up with the Crookwood console I want, I am going to need a high quality digital stereo I/O from the PC. Some of these devices mentioned seem slightly overkill for my requirements though. Lots of people seem to like the Lynx and RME, which seem fairly basic and not too expensive.
Logged

jamesp

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
Re: What interface are you using to get in/out of your DAW?
« Reply #9 on: April 05, 2011, 07:56:23 am »
I'm using an old RME Hammerfall 9636 PCI card. I've made the decision to standardise on ADAT optical and SPDIF co-axial connections to the computer rather than try to handle analogue connections in the computer. I can then use the same A/D and D/A convertors with my Focusrite based laptop setup too if necessary.

James.
Logged
James Perrett - JRP Music
http://www.jrpmusic.net

Thomas W. Bethel

  • Sr. Member
  • ****
  • Online Online
  • Posts: 321
  • Real Full Name: Thomas W. Bethel
  • When only the best will do.
Re: What interface are you using to get in/out of your DAW?
« Reply #10 on: April 05, 2011, 08:28:14 am »
An older RME card Digi96 PAD 8 96kHz on two of our computers and a Lynx One on one of our computers. All work GREAT!
Logged
Thomas W. Bethel
Managing Director
Acoustik Musik, Ltd.
http://www.acoustikmusik.com/

Doing what you love is freedom.
Loving what you do is happiness.

Celebrating 25 years in business in 2020

LudwigM

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Re: What interface are you using to get in/out of your DAW?
« Reply #11 on: April 05, 2011, 08:55:06 am »
the rme hdspe-aes card with a special multicore to adress all the different converters is running great since a few years in my system.
Logged

Greg Reierson

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 74
Re: What interface are you using to get in/out of your DAW?
« Reply #12 on: April 05, 2011, 09:28:48 am »
Lynx AES16 and Lynx Two (B).


GR
Logged
Greg Reierson
Rare Form Mastering

ggidluck

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 70
Re: What interface are you using to get in/out of your DAW?
« Reply #13 on: April 05, 2011, 10:09:10 am »
RME Multiface. Can use the PCI card in a desktop or Hammerfall cardbus card in the laptop to connect to it.
Logged

bblackwood

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
Re: What interface are you using to get in/out of your DAW?
« Reply #14 on: April 05, 2011, 10:58:45 am »
Eight-plus years of RME Digi96 use here. Zero issues, zero complaints (except they don't appear to make drivers for anything past WinXP)...
Logged
Brad Blackwood
euphonic masters
Pages: [1] 2 3  All   Go Up
« previous next »