R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: amphenol connector issues  (Read 1698 times)

absolutkj

  • Newbie
  • *
  • Offline Offline
  • Posts: 21
amphenol connector issues
« on: December 11, 2005, 03:07:30 PM »

I'm trying to make some new cables for my old EV 600 series mics (they have those 4 pin amphenol connectors), but I'm having trouble soldering the wires into the connectors.  I have a wiring diagram for lo z, so I know which wires should go where, but I was wondering if there was any trick to getting the wires to solder into the four pins.  Has anyone done this before or know of a website with instructions?
Logged

Brian Roth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 913
Re: amphenol connector issues
« Reply #1 on: December 13, 2005, 06:42:14 AM »

Tin the leads on the wires.  Tin the leads on the connector.  Solder.

Bri

Logged
Brian Roth Technical Services
Oklahoma City, OK
www.BrianRoth.com
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.061 seconds with 16 queries.