R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Yamaha PM2000  (Read 26856 times)

jason spartz

  • Newbie
  • *
  • Offline Offline
  • Posts: 24
Re: Yamaha PM2000
« Reply #30 on: January 10, 2005, 01:38:50 PM »

Glad it is working.  I have my matrix 1/2 output feeds my speakers.  I have this backed down (dialed around 2:00) on the board.  My Matrix 3/4 feed is my stereo mix to my recording device.  This one sits wide open and the levels work great.  I have Matrix 5 as a feed for my sub.  That way I can change the level as well as turn it on/off easily.  For me Martix 6 is open at the moment.  Matrix 7/8 are my stereo headphone feed to a headphone amp in the other room.  

I also have the program outputs (1-8) going into my patchbay incase I want to route my subgroup mixes to my DAW.  This setup works well for my needs.




  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: Yamaha PM2000
« Reply #31 on: June 30, 2005, 08:50:20 AM »

Hi Chris,

I just found your post about the mic pre circuit kit that you did for the yamaha parts.Do you still have any left?

Thanks, Stace


  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
Re: Yamaha PM2000
« Reply #32 on: February 19, 2006, 01:56:31 AM »

Hia PM2000 fans!

Weve finally got the EQ and Solo in place mods ready to go, and Ive started a thread on the Lab with all the info and pics.

Heres the link:

http://www.prodigy-pro.com/forum/viewtopic.php?p=158323#1583 23


This supports my pet theory that weird, purple jellyfish are behind everything peculiar that ever happens anywhere.
Pages: 1 2 [3]  All   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.069 seconds with 20 queries.