R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: End of signal path before hitting the cutterhead limiter...  (Read 2056 times)

dietrich

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 80
  • Real Full Name: ds
End of signal path before hitting the cutterhead limiter...
« on: February 07, 2012, 11:16:12 AM »

I know a few people use the PL2 or MPL2 mainly for de-essing before hitting the cutterhead.

My needs are for smoothing out fast transients on loud dance record kick drums. I have DAW solutions now and time to analog it.

Thoughts PL2 vs MPL2 vs Fet II on the task

need to determine which option offers faster attack and release times

Answering my only question seems the Daking has more control for smooth specific audio. Noticed the ADT TM limiter as well
Logged

Gold

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 85
Re: End of signal path before hitting the cutterhead limiter...
« Reply #1 on: February 07, 2012, 11:42:28 AM »

I like multibands for this. I use the MLA3 or the Flux Alchemist. With a multiband you can grab mostly the attack or mostly the boom or both.
Logged
Paul Gold
Salt Mastering

Infrasonic Sound

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
  • Real Full Name: Pete Lyman
Re: End of signal path before hitting the cutterhead limiter...
« Reply #2 on: February 12, 2012, 02:17:13 PM »

I've been using the Etec DBTL20 with good results.

http://www.etec.dk/ortofon-vintage.html

Logged
Pages: [1]   Go Up
 


Site Hosted By Ashdown Technologies, Inc.

Page created in 0.045 seconds with 21 queries.