R/E/P Community
R/E/P => R/E/P Archives => Bruno Putzeys (Designer) - Dave Hecht (Master Tech) => Topic started by: j.hall on May 11, 2004, 12:22:14 PM
-
i had the master section of my amek big modded.
the mod sounds great, and i'm really happy with it but was wondering about retro fitting a higher quality (possibly stepped) attenuator in the monitor path, "control room volume".
right now it has a 10k log pot. i have a moderate amount of space "under the hood" to mount something. under 200 dollars, what are my option?
-
here's what I generally do
http://www.partsconnexion.com/catalog/controlsswitches.html
you'll hit a page of stepped attenuators - currently they are sold out - too bad
and there are tabs on the bottom of that page
so go to potentiometers
I generally buy the TDK parts
TKD - STEREO Conductive Plastic Potentiometer, 10K (50 dB audio taper)
It'll be a huge improvement
-
email sent
hopefully that means it's ordered
i spent about 30 minutes filling out the PDF. probably could have gone quicker to just call it in.
does that pot have a standard shaft diameter?
any websites i can browse with cool knobs?