R/E/P Community
R/E/P => Recording - Engineering & Production => Topic started by: aztecpatchbay on January 03, 2015, 03:10:00 PM
-
HI Guys, I have been installing and integrating recording studios for almost 20 years and I have always had to find quirky solutions for labelling bays. Well I decided that someone had to come up with a solution that would yield professional looking labels on our bays, so I developed a program. If anyone is interested in it you can check out www.aztecpatchbay.com
I attached some screenshots of the program.
Let me know your thoughts
Rob
-
What a cool idea!!! ...yet I have to ask myself -- "where were you 10-15 years ago when 'patch bays' were a near daily part of the majority of the industries reality"? Thanks for doing this now!!! There are still a bunch of studios that require this labeling technology -- its great that someone finally got around to doing this on a level that is "shareable".
Peace
-
The OP seems to have a typo in the web address. I think this is correct: http://aztecpatchbay.com/
-
Hmmm. Only works with windows, which means 98% of the pro audio community can't use it. Might want to rethink that strategy!
-
Luckily my office system is Windows 8)
Thanks! Much easier than using XL...
-
There are tons of XCel Patch Templates out there that work on Mac OS no problem.
Glenn
-
Hey Guys, I just release a brand new patchbay labelling program that does not require excel (like my previous version) and is FULLY MAC COMPATIBLE!!! It works with Windows too. Check it out if anyone is interested. www.aztecpatchbay.com
-
The screen shot of your program looks decent would have to test it out but by the looks of things you have something great that a good few producers would still fund useful.
-
PatchCAD Patchbay Design and Labelling Software. Design beautiful and accurate patchbay systems within minutes using the new and improved PatchCAD 2.
[https://www.youtube.com/watch?v=PYvkCvVUKJk]how to brush teeth for small kids[/https://www.youtube.com/watch?v=PYvkCvVUKJk]
-
PatchCAD Patchbay Design and Labelling Software. Design beautiful and accurate patchbay systems within minutes using the new and improved PatchCAD 2.
https://www.youtube.com/watch?v=PYvkCvVUKJk (https://www.youtube.com/watch?v=PYvkCvVUKJk)
-
98% of the pro audio community is a bit high, because while 98% could have Macs, a very high proportion all have windows - because there are some things Macs cannot do. Hard to imagine, perhaps, but quite accurate.
-
Hello friends