OK.. i got it to work i think... from my emu card cards out (L), i connected one cable and thats going into "line in" socket on the back of my compressor. then i've got another cable going from the "out1" socket on the back of my compressor to the "IN R" on my EMU card... so i can moniter the sound, i have another cable going from the "OUT R" on my emu into my behringer ub 502 mixer.. and my mixer is connected to my reciever so i can moniter sounds out throug my speakers..
the sound is being compressed. but the problem is that when i activate the drum sound wihin FL.... i'm getting a verrry long ringing sound that is like.. infinite. it never stops.....
and there are three "IN slots" on the back of my compressor.." line in, insert, mix in" when the cable is plugged into the "insert" socket, nothing lights up on my compressor when i activate the drum sound... so its plugged into the "line in"
the only way the ringing will stop is if i turn the drum all the way down, makng it less audible.. but the ringing goes away.... how can i resolve this... thanks for yalls help