R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Nagra TA  (Read 5620 times)

Dominick Costanzo

  • Newbie
  • *
  • Offline Offline
  • Posts: 48
Nagra TA
« on: January 22, 2011, 08:05:04 AM »

Any TA users / gurus here?

Salvaged from a scrap truck.
serial #00390
Seems to be in excellent condition except the 2 cables from the control panel have been cut.
I've confirmation that the upper cable from the control panel goes to the side of the machine by the take up reel. Easy enough to replace. It's 8 cond. + shield. each cond. has a unique color.
I also know the lower one goes to the rear panel BJ13 "RS422" but there a rub.
The machine has a TAERS RS422 / synchronizer interface module
The RS422 cable to the control panel has a splitter that plugs into BJ13 on the rear panel of the machine.
The splitter has a cable that goes to the control panel and a female DB9 connector.
The RS422 cable to the TAERS connects to this female DB9
The cable to the TAERS is no problem to repair.
It also has 8 individual conductors, each with a unique color and an overall shield.
The cable to the control panel is my problem. It is 5 pair with an overall shield.
There are 5 black wires in the cable.
The cable connects inside the control panel via one 6 position and one 12 position green colored "amp" connectors labeled "P1" (6 position) and "P2" (12 position).
Drawing attached shows what I'm dealing with.
Does anyone have specific info regarding which black wire goes where?
Logged
Dominick Costanzo

Dominick Costanzo

  • Newbie
  • *
  • Offline Offline
  • Posts: 48
Re: Nagra TA
« Reply #1 on: January 22, 2011, 08:08:58 AM »

Here's a picture of the "P1" & P2" connectors inside the control panel
Logged
Dominick Costanzo

Mac Kerr

  • Old enough to know better
  • Supermod
  • Full Member
  • *****
  • Offline Offline
  • Posts: 210
Re: Nagra TA
« Reply #2 on: January 22, 2011, 12:01:09 PM »

Logged
Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.062 seconds with 18 queries.