Hey all,
I thought I would chime in here.. I will try and stay technical as I can. I don't want to make this an add.
So my k47 ish capsule was really just a fun experiment at first that actually sounded pretty good. So a little history.
All of my machining is done in the states by a local guy here in NC, I have him disk off the brass and add the more complicated small threading that I can do on my machine so I essentially get blanks with no holes drilled for 87/67 style capsules. Then I drill the holes on the face. Anyway long story short is I wanted a capsule and only had the 67 style blanks, thought why not give a 47 hole pattern a try. As I'm sure you all know one half of a 67 is only around 4mm thick and a true k47 is 6mm or so.. I had to play with hole size depth etc to get it to sound good but so far I am happy. It's not a true k47 by any stretch. It's a bit more modern sounding, more 10k and above really, But the over all sound is pretty close. Great in a fet47. No clone parts here.. 100% usa.