R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: consequences of incorrect plate voltage  (Read 429 times)

Brian Campbell

  • Newbie
  • *
  • Offline Offline
  • Posts: 19
  • Real Full Name: Brian Campbell
consequences of incorrect plate voltage
« on: June 24, 2018, 05:39:26 pm »

What are the effects of incorrect B+/plate voltages with regards to frequency response?
Is there a general guideline of tolerances?
Logged

klaus

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1564
Re: consequences of incorrect plate voltage
« Reply #1 on: June 24, 2018, 05:45:03 pm »

Plate and B+ voltages are not necessarily interrelated. Bad tubes will cause low plate voltages, even if B+ is correct.

On the other hand, extreme B+ variations-too much or too little- will cause capsule distortion or noise, because capsule polarization voltage is usually divided off the B+ supply voltage. Here, even just a few more volts deviating in either direction will cause audible artifacts.

None of this answers your question. I have not experienced frequency deviations, because the other effects of too litte or too much B+ and plate voltages are overwhelming.
Logged
Klaus Heyne
German Masterworks®
www.GermanMasterworks.com
Pages: [1]   Go Up