Thanks... BTW, that is one hell of a cool system!! My absolute favorite use for it was to take a DI bass into the control room, split the signal, run ½ of the signal to a pre-amp [add compression to taste], and print it... and the other half of the signal through a Little Labs "IBP" [In Between Phase] box, through the "STD" [Signal Transmission Device], and plug it into the bass amp. From there you can tweeze the phase relationship of the DI & Mic'ed signals and really define the "vowel" of the bass sound so it sits in the mix perfectly -- usually with zero "EQ" [which you pretty much did with the IBP box].
Peace
