R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

News:


Author Topic: Neumann M49 / M50 mounting alternatives  (Read 1368 times)

Offline SNEMEIS

  • Newbie
  • *
  • Posts: 2
  • Real Full Name: Matthias H. Franz Hahn
Neumann M49 / M50 mounting alternatives
« on: January 16, 2017, 07:47:52 am »
Hi there, i am looking for an alternative mounting solution for M49 and M50 microphones besides the yokes and swivel mounts.

Any around?

I could bet i have seen a P&P Berlin made spider mount for those at some point.P&P are no longer though...

Thank you!
Matthias

Online gtoledo3

  • Newbie
  • *
  • Posts: 37
  • Real Full Name: George Toledo
Re: Neumann M49 / M50 mounting alternatives
« Reply #1 on: January 16, 2017, 11:05:56 am »
You might contact tab funkenwerk and see if Dennis there has a lead on any.

They have M49 kits in stock as of a few weeks ago, so there is a good chance they also have the spider mounts they have sold over the years.

(Though I had previously speculated that they may have been getting theirs from P&P...)

Online gtoledo3

  • Newbie
  • *
  • Posts: 37
  • Real Full Name: George Toledo
Re: Neumann M49 / M50 mounting alternatives
« Reply #2 on: January 16, 2017, 11:10:31 am »

Offline klaus

  • Moderator
  • Hero Member
  • *****
  • Posts: 1516
Re: Neumann M49 / M50 mounting alternatives
« Reply #3 on: January 16, 2017, 05:56:03 pm »
Not sure what mount is pictured in the photo above, but here is a Neumann Pinboard thread from 2008 on the subject, and it does not look like a genuine Neumann suspension mount has been issued for that mic in a long time, if ever. I certainly have never seen one:

http://www.neumann.com/forums/view.php?site=neumann&bn=neumann_mictec&key=1210351775
« Last Edit: January 16, 2017, 09:02:25 pm by klaus »
Klaus Heyne
German Masterworks®
www.GermanMasterworks.com

Offline SNEMEIS

  • Newbie
  • *
  • Posts: 2
  • Real Full Name: Matthias H. Franz Hahn
Re: Neumann M49 / M50 mounting alternatives
« Reply #4 on: January 18, 2017, 03:58:59 pm »
I was under the impression that P&P made one on their own - not as a Neumann product.
Its a shame those are no longer.Thanks for the hint George!