R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: [NTP] ELMA switches  (Read 2968 times)

2000F

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
[NTP] ELMA switches
« on: January 14, 2011, 10:04:59 AM »

Hi,

my two NTP 179-120 compressor units needs their COMPRESSION and RATIO switches replaced. Lovely units, but can't work with the old original switches any more. Usually my tech would replace them with ELMA 6 position (8 poles and 4 poles) type switches, however, these days it is apparently only possible to buy 25 or more switches (before it was 10 pieces), and the tech therefore recommend (as the second best) Greyhill swtiches, which can be bought in quantities of 10.
But, does any of you wise men know of where to buy ELMA switches in small quantities?


big up
Frederik
Logged

volki

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 309
Re: [NTP] ELMA switches
« Reply #1 on: January 17, 2011, 03:52:46 PM »

i guess you were talking about ordering from elma directly?
the major electronic retailers (r/s, farnell, conrad, buerklin etc.) here in central europe should be able to sell you small amounts as well. you could also ask at the elma.ch headquarters for distributors and stores in your country. the swiss guys are very helpful.
Logged
Volker Meitz

2000F

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: [NTP] ELMA switches
« Reply #2 on: January 18, 2011, 03:43:36 AM »

Hi Volker,

thanks for your kind reply, I'll check it out asap. Smile

cheers
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.078 seconds with 17 queries.