R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: [NTP] ELMA switches  (Read 2775 times)

2000F

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
[NTP] ELMA switches
« on: January 14, 2011, 02:41:50 AM »

Hi,

my two NTP 179-120 compressor units needs their COMPRESSION and RATIO switches replaced. Lovely units, but can't work with the old original switches any more. Usually my tech would replace them with ELMA 6 position (8 poles and 4 poles) type switches, however, these days it is apparently only possible to buy 25 or more switches (before it was 10 pieces), and the tech therefore recommend (as the second best) Greyhill swtiches, which can be bought in quantities of 10.
But, does any of you wise men know of where to buy ELMA switches in small quantities?


big up
Logged

ssltech

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4780
Re: [NTP] ELMA switches
« Reply #1 on: January 14, 2011, 08:18:43 AM »

Ask in Dave Hecht's forum, for more tech eyeballs. Also, try Prodigy-Pro forums.
Logged
MDM (maxdimario) wrote on Fri, 16 November 2007 21:36

I have the feeling that I have more experience in my little finger than you do in your whole body about audio electronics..

2000F

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: [NTP] ELMA switches
« Reply #2 on: January 14, 2011, 10:08:22 AM »

ssltech wrote on Fri, 14 January 2011 14:18

Ask in Dave Hecht's forum, for more tech eyeballs. Also, try Prodigy-Pro forums.


cheers bruv
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.176 seconds with 20 queries.