R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

News:


Author Topic: RE-20 Repair  (Read 27184 times)

Offline Bill_Urick

  • Hero Member
  • *****
  • Posts: 1626
RE-20 Repair
« on: August 12, 2010, 09:53:34 pm »
I have a couple of old RE20's that need fixin' up.
Both were kind of rattling around, one had no output.
As I hoped, the one with no output just had a broken wire at the capsule.

The question is, what was used to suspend the inner workings of the mic within the body?

It's all pretty much dust now.

Thanks!
Good sense is, of all things among men, the most equally distributed; for everyone thinks himself so abundantly provided with it, that those even who are the most difficult to satisfy in everything else, do not usually desire a larger measure of this quality than they already possess.

Offline zebra50

  • Newbie
  • *
  • Posts: 46
Re: RE-20 Repair
« Reply #1 on: August 13, 2010, 02:25:32 am »
Hi Bill,

I'd give EV a call. The mics are still in production and the foam inserts should still be available.

Stewart
Stewart Tavener
Xaudia - studio, ribbon mic repairs
http://www.xaudia.co.uk

Offline Bill_Urick

  • Hero Member
  • *****
  • Posts: 1626
Re: RE-20 Repair
« Reply #2 on: August 13, 2010, 07:35:02 am »
Ok. So it's just foam.
Your suggestion is great.
Which explains why I didn't think of it.
Thank you!
Good sense is, of all things among men, the most equally distributed; for everyone thinks himself so abundantly provided with it, that those even who are the most difficult to satisfy in everything else, do not usually desire a larger measure of this quality than they already possess.

Offline compasspnt

  • Hero Member
  • *****
  • Posts: 16266
Re: RE-20 Repair
« Reply #3 on: August 13, 2010, 10:18:55 am »
Request a price from EV before any work is carried out.

I recently 'sent away' a couple of time-degraded 20s merely requesting repairs, and they came back beautifully done...but the bill was much larger than I would have ever expected.

Know what you are getting into beforehand.

Offline Matt Allen

  • Sr. Member
  • ****
  • Posts: 250
Re: RE-20 Repair
« Reply #4 on: August 13, 2010, 11:22:29 am »
The RE20 I had repaired by EV last year cost $200 plus shipping.
Matt "Buster" Allen
www.allen-sound.com

Offline nob turner

  • Sr. Member
  • ****
  • Posts: 383
Re: RE-20 Repair
« Reply #5 on: August 13, 2010, 12:49:49 pm »
send it to marc at location sound corp. in north hollywood.  he just did one for me, cost about $80 with shipping.
Why do you think they call it the control room?
www.garymankin.com


Offline Mike Cleaver

  • Hero Member
  • *****
  • Posts: 610
Re: RE-20 Repair
« Reply #6 on: August 13, 2010, 02:28:59 pm »
Sometimes EV (or whatever they're called today) will sell you the necessary foam to "do it yourself."
You want to make sure you carefully clean out all of the old foam residue before replacing it with the new stuff.
The hardest part is getting the mini allen wrench to open up the mic.
Some people I know also have made their own foam inserts.
Radio stations have dozens of these mics in use daily.
For some reason, the foam in some of them deteriorates rather quickly.
On the other hand, I've seen some 20 plus year old models where the foam is as good as new.
Mike Cleaver Broadcast Services
Vancouver, BC, Canada
Broadcast Studio Design and Consulting
Voiceover Talent
Newscaster

Offline zebra50

  • Newbie
  • *
  • Posts: 46
Re: RE-20 Repair
« Reply #7 on: August 13, 2010, 03:36:00 pm »
I was under the impression that the foam liner was available as a service part.
Stewart Tavener
Xaudia - studio, ribbon mic repairs
http://www.xaudia.co.uk

Offline Fenris Wulf

  • Sr. Member
  • ****
  • Posts: 499
Re: RE-20 Repair
« Reply #8 on: August 14, 2010, 03:03:40 am »
Mike Cleaver wrote on Fri, 13 August 2010 19:28


The hardest part is getting the mini allen wrench to open up the mic.

It's 0.035", which is roughly equal to 0.9 mm.
RESIST THE CYBERNETIC OVERLORDS
KDVS Studio A

Offline Bill_Urick

  • Hero Member
  • *****
  • Posts: 1626
Re: RE-20 Repair
« Reply #9 on: August 14, 2010, 07:15:30 am »
This is strictly DIY. Both mics disassembled already.

Fenris Wulf wrote on Sat, 14 August 2010 03:03


It's 0.035", which is roughly equal to 0.9 mm.


Found this info in a previous thread here which was very timely, thank-you!

Mike Cleaver wrote on Fri, 13 August 2010 19:28

 
The hardest part is getting the mini allen wrench to open up the mic.


Even knowing the size getting the wrench was not easy. Most normal tool sources (around here,anyway) don't carry them this small.


Good sense is, of all things among men, the most equally distributed; for everyone thinks himself so abundantly provided with it, that those even who are the most difficult to satisfy in everything else, do not usually desire a larger measure of this quality than they already possess.

Offline lucabasano

  • Newbie
  • *
  • Posts: 4
Re: RE-20 Repair
« Reply #10 on: August 14, 2010, 04:39:47 pm »
  http://cid-993a80edf9120ac0.skydrive.live.com/browse.aspx/EV %20RE20%20-%20Filter%20Replacement?ct=photos

Hope it helps.
I've replaced foam to two Re20's no more than a couple months ago.
Just to mention,get in touch with your EV dealer(texim here in Italy),they've sent me parts in a week.
If U need,I can search and double check invoice,but from memory it's around Euro 40,00 for the three part(78233,78231).

Lucaindex.php/fa/15251/0/

Offline lucabasano

  • Newbie
  • *
  • Posts: 4
Re: RE-20 Repair
« Reply #11 on: August 14, 2010, 04:41:32 pm »
Sorry,I've forgotten parts list.

Lucaindex.php/fa/15252/0/

Offline Bill_Urick

  • Hero Member
  • *****
  • Posts: 1626
Re: RE-20 Repair
« Reply #12 on: August 14, 2010, 11:31:50 pm »
Beautiful!
Thanks, Luca.
Good sense is, of all things among men, the most equally distributed; for everyone thinks himself so abundantly provided with it, that those even who are the most difficult to satisfy in everything else, do not usually desire a larger measure of this quality than they already possess.

Offline zebra50

  • Newbie
  • *
  • Posts: 46
Re: RE-20 Repair
« Reply #13 on: August 15, 2010, 03:18:11 am »
That's an awesome photo-tutorial. Thanks for sharing!
Stewart Tavener
Xaudia - studio, ribbon mic repairs
http://www.xaudia.co.uk

Offline studiochap

  • Full Member
  • ***
  • Posts: 177
Re: RE-20 Repair
« Reply #14 on: August 19, 2010, 09:09:02 am »
Thanks Luca - this is really helpful!

Cheers,

Gwyn
Gwyn Mathias
Odessa Wharf Studios ( now down the tubes after 14yrs...RIP )
Pro Audio Survivor...Smile

"What,Me Worry?" Alfred E. Neumann (...or was it Newmann?Smile

Electrical Theory by Joseph Lucas (inventor of the Self-Dimming Headlamp):
"Smoke is the thing that makes electrical circuits work; we know this to be true because every time one lets the smoke out of the electrical system, it stops working"