R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: "not to be used in cathode follower"  (Read 3500 times)

YZ

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 868
"not to be used in cathode follower"
« on: November 29, 2008, 01:51:49 am »

Could someone explain to me why this 12AX7 tube is not recommended for cathode-follower usage?

http://www.kcanostubes.com/products/377/Tung-Sol-Reissue-12A X7-15.htm

Logged
regards,

YZ

Stephen Payne

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 67
Re: "not to be used in cathode follower"
« Reply #1 on: November 29, 2008, 08:05:27 pm »

I've always heard that all 12ax7s are bad for cathode follower.
Logged
Steve

Jim Williams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1105
Re: "not to be used in cathode follower"
« Reply #2 on: December 01, 2008, 10:46:22 am »

There are simply better choices. A follower is a unity gain configuration, the 12Ax7 is a high mu (gain) tube. It has poor high impedance output current. The better choice is a 12AT7 as a follower. It's a poor choice for gain as it doesn't have nearly as much.
Logged
Jim Williams
Audio Upgrades

Dave Hecht

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 457
Re: "not to be used in cathode follower"
« Reply #3 on: December 02, 2008, 02:32:10 am »

12ax7 cathode follower is pretty common in guitar amps. Fender, Marshall, Hiwatt, Orange have all used a 12ax7 follower on many of their models. Can't see any reason why this one wouldn't work as well as any other new 12ax7 in those type of circuits. For other applications, as Jim mentioned, 12at7 or 12au7 would be a better choice.

Dave Hecht
Logged

YZ

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 868
Re: "not to be used in cathode follower"
« Reply #4 on: December 17, 2008, 03:11:34 am »

Dave Hecht wrote on Tue, 02 December 2008 05:32

12ax7 cathode follower is pretty common in guitar amps. Fender, Marshall, Hiwatt, Orange have all used a 12ax7 follower on many of their models. Can't see any reason why this one wouldn't work as well as any other new 12ax7 in those type of circuits. For other applications, as Jim mentioned, 12at7 or 12au7 would be a better choice.

Dave Hecht


What got me stumped was the fact that only that particular brand of 12ax7 has the 'not for cathode follower' notice on that website.

I'm still curious; that notice would make me wary of using that tube for anything.
Logged
regards,

YZ

Jim Williams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1105
Re: "not to be used in cathode follower"
« Reply #5 on: December 17, 2008, 12:42:22 pm »

All the classic Marshall amps used a 12AX7A cathode follower before the passive EQ section. That never seemed to effect those poorly. Maybe try this brand (what was it?) in a Marshall and see.
Logged
Jim Williams
Audio Upgrades

Dave Hecht

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 457
Re: "not to be used in cathode follower"
« Reply #6 on: December 17, 2008, 01:19:48 pm »

YZ wrote on Wed, 17 December 2008 00:11

Dave Hecht wrote on Tue, 02 December 2008 05:32

12ax7 cathode follower is pretty common in guitar amps. Fender, Marshall, Hiwatt, Orange have all used a 12ax7 follower on many of their models. Can't see any reason why this one wouldn't work as well as any other new 12ax7 in those type of circuits. For other applications, as Jim mentioned, 12at7 or 12au7 would be a better choice.

Dave Hecht


What got me stumped was the fact that only that particular brand of 12ax7 has the 'not for cathode follower' notice on that website.

I'm still curious; that notice would make me wary of using that tube for anything.


That note's on a dealer's website - what does the manufacturer recommend? Might just be the dealer's preference. If it is in fact a true 12ax7, there should be no reason it can't be used in place of any other 12ax7.

Dave Hecht
Logged

Gustav

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 70
Re: "not to be used in cathode follower"
« Reply #7 on: December 22, 2008, 06:53:28 pm »

Could it be a heater to cathode voltage limit?  Would they be OK with a raised heater?
Logged

Brian Kehew

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2914
Re: "not to be used in cathode follower"
« Reply #8 on: December 30, 2008, 02:54:32 am »

Maybe a gain (voltage, as you say) issue - as the 12AX7 has so much more gain than the AT or AU versions...

BTW - the new book on VOX amps has a wonderful section about amp designs and how they work. Our friend knew nothing about electronics as he was writing it, and he learned in order to present the material so ANY layman could understand. First book I've seen do that - I learned a lot myself.

http://www.voxguidebook.com
Logged
Relax and float downstream...

Dave Hecht

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 457
Re: "not to be used in cathode follower"
« Reply #9 on: December 31, 2008, 02:26:34 am »

[quote title=Brian Kehew wrote on Mon, 29 December 2008 23:54]Maybe a gain (voltage, as you say) issue - as the 12AX7 has so much more gain than the AT or AU versions...

Gain won't be an issue in a cathode follower circuit - gain is essentially unity. Most 12ax7s work fine in a follower, so this issue seems to relate to just this particular tube. Again, if it's truly a 12ax7, it should work in place of any other 12ax7.

Dave Hecht
Logged
Pages: [1]   Go Up