R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: M49 Capsule capacitor (C4)  (Read 2404 times)

Steve Culp

  • Newbie
  • *
  • Offline Offline
  • Posts: 14
M49 Capsule capacitor (C4)
« on: December 08, 2006, 03:07:57 pm »

I have some M49s that have an 8pf capacitor between the capsule and the plate of the AC701. I am interested in dropping this to 4pf. What is the best replacement for the original capacitors? Metal film? It appears the old ones are glass, but I can't find a modern day source... Any recommendations?

Thanks for moderating Oliver!

Steve
Logged

Gustav

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 70
Re: M49 Capsule capacitor (C4)
« Reply #1 on: December 08, 2006, 07:36:40 pm »

Do you have a good cap tester?  If so look for wire wrap wire.  Some is teflon with OFHC copper and a silver plating.  Twist a small lenght and measure it if it to high clip some off, this might take a few tries.  This is an old trick to make a small value cap.

I use shrink tube to hold the wire tight and at small pf values you need to shape and test it the shape it will be installed.

Gustav



Logged
Pages: [1]   Go Up